Database of Steel and Alloy (Marochnik)

  Home     Steel and Alloy     Search     Equivalent Grades     GOST Standards     Grading     Contacts  
   
YOU HERE:   Steel and Alloy   ->   High-temperature or heat-resistant steel and alloy

Characteristics for grade     KhN70VMTYu   ( ХН70ВМТЮ )



      Grade :   KhN70VMTYu   ( ХН70ВМТЮ ) (   ЭИ617     ХН70ВМТЮ-ВИ     ЭИ617-ВИ   )
      Classification :   Hidh-temperature or heat-resistant alloy
      Equivalent grades:     Is absent



Chemical composition in % for grade   KhN70VMTYu   ( ХН70ВМТЮ )
Fe C Si Mn Ni S P Cr Ce Mo W V TiAl B
max   5max   0.12max   0.7max   0.561.5 - 76.4max   0.02max   0.0213 - 16max   0.022 - 45 - 70.1 - 0.51.8 - 2.31.7 - 2.3max   0.02
Comment: Ni is a basis; the percentage of Ni is given approximately.


Mechanical properties under Т=20oС for grade   KhN70VMTYu   ( ХН70ВМТЮ )
Assortment Dimension Direct. sв sT d5 y KCU Heat treatment
- mm - MPa MPa % % kJ / m2 -
Bar, GOST 23705-79     670-690  3-78-10 Hardening and ageing


    Brinell hardness for     KhN70VMTYu   ( ХН70ВМТЮ )   (quenching, ageing) ,     Bar GOST 23705-79 HB 10 -1 = 299 - 341   MPa


Technological properties for grade   KhN70VMTYu   ( ХН70ВМТЮ )
  Weldability: hard weldability.



Types of delivery of grade   KhN70VMTYu   ( ХН70ВМТЮ )
В32 - Graded and shaped rolling


Specification :
Mechanical properties :
sв - Tensile strength , [MPa]
sT - Yield stress, [MPa]
d5 - Specific elongation at fracture , [ % ]
y - Reduction of area , [ % ]
KCU - Impact strength , [ kJ / m2]
HB - Brinell hardness , [MPa]

Physical properties :
T - Test temperature , [Grade]
E - Young modulus , [MPa]
a - Coefficient of linear expansion (range 20o - T ) , [1/Grade]
l - Termal (heat) condition coefficient , [Watt/(m·Grade)]
r - Density , [kg/m3]
C - Specific heat ( range 20o - T ), [J/(kg·Grade)]
R - Electrical resistance , [Ohm·m]

Weldability :
without limitations - welding is done without heating and subsequent heat treeting
limited weldability - welding is possible under heating up to 100-120 grade and subsequent heat treeting
hard weldability - obtaining the quality welding needs the additional operations:heating up to 200-300 grade; the heat treeting ia annealing

  KhN70VMTYu   ( ХН70ВМТЮ ) - Hidh-temperature or heat-resistant alloy: chemical composition, mechanical and physical properties, hardness
Database of steels and alloys (Marochnik) contains information about chemical composition and properties more then 3000 steels and alloys

    ©   2003 - 2024         Database of Steel and Alloy (russian title is the Marochnik)
Administration of the Marochnik is not responsible for the content's use.
Рейтинг@Mail.ru