Database of Steel and Alloy (Marochnik)

  Home     Steel and Alloy     Search     Equivalent Grades     GOST Standards     Grading     Contacts  
   
YOU HERE:   Steel and Alloy   ->   High-temperature or heat-resistant steel and alloy

Characteristics for grade     KhN60Yu   ( ХН60Ю )



      Grade :   KhN60Yu   ( ХН60Ю ) (   ЭИ559А   )
      Classification :   Hidh-temperature or heat-resistant alloy
      Equivalent grades:     Is absent



Chemical composition in % for grade   KhN60Yu   ( ХН60Ю )
Fe C Si Mn Ni S P Cr CeAl Ba
19.13 - 27.4max   0.1max   0.8max   0.355 - 58max   0.02max   0.0215 - 18max   0.032.6 - 3.5max   0.1


Mechanical properties under Т=20oС for grade   KhN60Yu   ( ХН60Ю )
Assortment Dimension Direct. sв sT d5 y KCU Heat treatment
- mm - MPa MPa % % kJ / m2 -
Casting cold-rolled, GOST 7769-82     720 360   50  


Technological properties for grade   KhN60Yu   ( ХН60Ю )
  Weldability: without limitations.


Physical properties for grade   KhN60Yu   ( ХН60Ю )
T E 10- 5 a 10 6 l r C R 10 9
Grade MPa 1/Grade Watt/(m·Grade) kg/m3 J/(kg·Grade) Ohm·m
20 2.1     7900    
100   12.28 10.5      
200   13.08 13      
300   13.42 15.9      
400   14.2 19.6      
500   14.22 24      
600   14.59 29.3      
700   15.11 34.5      
800 1.69 15.18 40.2      
900   15.88 47.4      
T E 10- 5 a 10 6 l r C R 10 9




Specification :
Mechanical properties :
sв - Tensile strength , [MPa]
sT - Yield stress, [MPa]
d5 - Specific elongation at fracture , [ % ]
y - Reduction of area , [ % ]
KCU - Impact strength , [ kJ / m2]
HB - Brinell hardness , [MPa]

Physical properties :
T - Test temperature , [Grade]
E - Young modulus , [MPa]
a - Coefficient of linear expansion (range 20o - T ) , [1/Grade]
l - Termal (heat) condition coefficient , [Watt/(m·Grade)]
r - Density , [kg/m3]
C - Specific heat ( range 20o - T ), [J/(kg·Grade)]
R - Electrical resistance , [Ohm·m]

Weldability :
without limitations - welding is done without heating and subsequent heat treeting
limited weldability - welding is possible under heating up to 100-120 grade and subsequent heat treeting
hard weldability - obtaining the quality welding needs the additional operations:heating up to 200-300 grade; the heat treeting ia annealing

  KhN60Yu   ( ХН60Ю ) - Hidh-temperature or heat-resistant alloy: chemical composition, mechanical and physical properties, hardness
Database of steels and alloys (Marochnik) contains information about chemical composition and properties more then 3000 steels and alloys

    ©   2003 - 2024         Database of Steel and Alloy (russian title is the Marochnik)
Administration of the Marochnik is not responsible for the content's use.
Рейтинг@Mail.ru