Database of Steel and Alloy (Marochnik) |
Home | Steel and Alloy | Search | Equivalent Grades | GOST Standards | Grading | Contacts |
Grade : | 07KH16N6 ( 07Х16Н6 ) ( Х16Н6 ЭП288 ) |
Classification : | Corrosion-resistant steel for general purposes |
Equivalent grades: | Go here |
C | Si | Mn | Ni | S | P | Cr |
0.05 - 0.09 | max 0.8 | max 0.8 | 5 - 8 | max 0.02 | max 0.035 | 15.5 - 17.5 |
Assortment | Dimension | Direct. | sв | sT | d5 | y | KCU | Heat treatment |
- | mm | - | MPa | MPa | % | % | kJ / m2 | - |
Bar, GOST 5949-75 | 1080 | 880 | 12 | 50 | 690 | |||
Forging, GOST 25054-81 | 1176 | 980 | 12-13 | 50 | 690 | |||
Sheet trick, GOST 7350-77 | 1180 | 390 | 15 | Normalizing 1030 - 1050oC, air, | ||||
Sheet thin, GOST 5582-75 | 1180 | 20 | Guenching 1030 - 1070oC,Cooling water, |
Brinell hardness for 07KH16N6 ( 07Х16Н6 ) , Forging GOST 25054-81 | HB 10 -1 = 341 - 415 MPa |
USA | Germany | Japan | France | England | Italy | Sweden | |||||||||||||
- | DIN,WNr | JIS | AFNOR | BS | UNI | SS | |||||||||||||
|
|
|
|
|
|
|
B03 - Metal forming treatment. Forgings |
В22 - Graded and shaped rolling |
B23 - Sheets and Strips |
В32 - Graded and shaped rolling |
B33 - Sheets and Strips |
Mechanical properties : | |
sв | - Tensile strength , [MPa] |
sT | - Yield stress, [MPa] |
d5 | - Specific elongation at fracture , [ % ] |
y | - Reduction of area , [ % ] |
KCU | - Impact strength , [ kJ / m2] |
HB | - Brinell hardness , [MPa] |
Physical properties : | |
T | - Test temperature , [Grade] |
E | - Young modulus , [MPa] |
a | - Coefficient of linear expansion (range 20o - T ) , [1/Grade] |
l | - Termal (heat) condition coefficient , [Watt/(m·Grade)] |
r | - Density , [kg/m3] |
C | - Specific heat ( range 20o - T ), [J/(kg·Grade)] |
R | - Electrical resistance , [Ohm·m] |
© 2003 - 2024 Database of Steel and Alloy (russian title is the Marochnik)
Administration of the Marochnik is not responsible for the content's use. |