Database of Steel and Alloy (Marochnik)

  Home     Steel and Alloy     Search     Equivalent Grades     GOST Standards     Grading     Contacts  
   
YOU HERE:   Steel and Alloy   ->   Stainless steel

Characteristics for grade     12KH17   ( 12Х17 )



      Grade :   12KH17   ( 12Х17 ) (   Х17   )
      Substitute:   12Х18Н9
      Classification :   Corrosion-resistant high-temperature steel
      Equivalent grades:   Go here



Chemical composition in % for grade   12KH17   ( 12Х17 )
C Si Mn S P Cr
max   0.12max   0.8max   0.8max   0.025max   0.03516 - 18


Mechanical properties under Т=20oС for grade   12KH17   ( 12Х17 )
Assortment Dimension Direct. sв sT d5 y KCU Heat treatment
- mm - MPa MPa % % kJ / m2 -
Pipe cooling strain, GOST 9941-81     441   17    
Pipe hot strain, GOST 9940-81     441   17    
Bar, GOST 5949-75   longitudinal 390 245 20 50 Annealing 760 - 780oC, air,
Sheet trick, GOST 7350-77     440   18   Annealing
Sheet thin, GOST 5582-75     490   20   Annealing 740 - 780oC,


    Brinell hardness for     12KH17   ( 12Х17 )   (annealing) ,     Bar GOST 5949-75 HB 10 -1 = 126 - 197   MPa


Technological properties for grade   12KH17   ( 12Х17 )
  Weldability: hard weldability.
Temper brittleness: predisposed


Physical properties for grade   12KH17   ( 12Х17 )
T E 10- 5 a 10 6 l r C R 10 9
Grade MPa 1/Grade Watt/(m·Grade) kg/m3 J/(kg·Grade) Ohm·m
20 2.32     7720   560
100 2.27 10.4 24   462 610
200 2.19 10.5 24     680
300 2.11 10.8 25     770
400 2.01 11.2 26     850
500 1.92 11.4 26     950
600 1.82 11.6       1030
700 1.65 11.9       1110
800 1.48 12.1       1150
900           1160
T E 10- 5 a 10 6 l r C R 10 9


Equivalent steels for grade     12KH17   ( 12Х17 )
Warning! Indicated both exact and nearest equivalents.
USAGermanyJapanFranceEnglandEuropeanItalySpainChinaSwedenPolandCzechia
-DIN,WNrJIS AFNORBSEN UNIUNEGBSSPNCSN
430
S43000
1.4016
X6CM7
X6Cr17
X8Cr17
SUS430
SUS430TB
SUS430TK
430F00
Z8C17
17Cr
430S15
430S17
430S18
1.4016
X6Cr17
X8Cr17
X6Cr17
X8Cr17
F.3113
X6Cr17
1Cr15
1Cr17
ML1Cr17
2320
H17
17040
17041



Types of delivery of grade   12KH17   ( 12Х17 )
В22 - Graded and shaped rolling
B23 - Sheets and Strips
В32 - Graded and shaped rolling
B33 - Sheets and Strips
В62 - Steel pipes and connecting parts to them


Specification :
Mechanical properties :
sв - Tensile strength , [MPa]
sT - Yield stress, [MPa]
d5 - Specific elongation at fracture , [ % ]
y - Reduction of area , [ % ]
KCU - Impact strength , [ kJ / m2]
HB - Brinell hardness , [MPa]

Physical properties :
T - Test temperature , [Grade]
E - Young modulus , [MPa]
a - Coefficient of linear expansion (range 20o - T ) , [1/Grade]
l - Termal (heat) condition coefficient , [Watt/(m·Grade)]
r - Density , [kg/m3]
C - Specific heat ( range 20o - T ), [J/(kg·Grade)]
R - Electrical resistance , [Ohm·m]

Weldability :
without limitations - welding is done without heating and subsequent heat treeting
limited weldability - welding is possible under heating up to 100-120 grade and subsequent heat treeting
hard weldability - obtaining the quality welding needs the additional operations:heating up to 200-300 grade; the heat treeting ia annealing

  12KH17   ( 12Х17 ) - Corrosion-resistant high-temperature steel: chemical composition, mechanical and physical properties, hardness
Database of steels and alloys (Marochnik) contains information about chemical composition and properties more then 3000 steels and alloys

    ©   2003 - 2024         Database of Steel and Alloy (russian title is the Marochnik)
Administration of the Marochnik is not responsible for the content's use.
Рейтинг@Mail.ru