Database of Steel and Alloy (Marochnik)

  Home     Steel and Alloy     Search     Equivalent Grades     GOST Standards     Grading     Contacts  
   
YOU HERE:   Steel and Alloy   ->   Aluminium alloy

Characteristics for grade     AlSi50(A)   ( AlSi50(A) )



      Grade :     AlSi50(A)   ( AlSi50(A) )
      Classification :   Master alloys of aluminium
      Equivalent grades:     Is absent



Chemical composition in % for grade   AlSi50(A)   ( AlSi50(A) )
Fe Si Mn Ni Cr Ti Cu Ca Be Mg Zn Sn Impurity -
max   0.347 - 53max   0.05max   0.05max   0.05max   0.05max   0.05max   0.15max   0.0001max   0.05max   0.05max   0.02other, each 0.04; all 0.1 Pb + Cd < 0.0095
Comment: Al is a basis; the percentage of Al is given approximately.



Types of delivery of grade   AlSi50(A)   ( AlSi50(A) )
B51 - Non-ferrous metals, including rare metals, and their alloys


Specification :
Mechanical properties :
sв - Tensile strength , [MPa]
sT - Yield stress, [MPa]
d5 - Specific elongation at fracture , [ % ]
y - Reduction of area , [ % ]
KCU - Impact strength , [ kJ / m2]
HB - Brinell hardness , [MPa]

Physical properties :
T - Test temperature , [Grade]
E - Young modulus , [MPa]
a - Coefficient of linear expansion (range 20o - T ) , [1/Grade]
l - Termal (heat) condition coefficient , [Watt/(m·Grade)]
r - Density , [kg/m3]
C - Specific heat ( range 20o - T ), [J/(kg·Grade)]
R - Electrical resistance , [Ohm·m]

  AlSi50(A)   ( AlSi50(A) ) - Master alloys of aluminium: chemical composition, mechanical and physical properties, hardness
Database of steels and alloys (Marochnik) contains information about chemical composition and properties more then 3000 steels and alloys

    ©   2003 - 2024         Database of Steel and Alloy (russian title is the Marochnik)
Administration of the Marochnik is not responsible for the content's use.
Рейтинг@Mail.ru