Database of Steel and Alloy (Marochnik)

Home

Steel and Alloy

Search

Equivalent Grades

GOST Standards

Grading

Contacts

YOU HERE: Steel and Alloy -> Aluminium alloy

Characteristics for grade Sil2S ( Сил2С )

Grade :	Sil2S ( Сил2С )
Classification :	Aluminium wrought alloys
Equivalent grades:	Is absent

Chemical composition in % for grade Sil2S ( Сил2С )

Fe	Si	Mn	Ti	Al	Cu	Ca	Mg	Zn	Impurity
max 0.2	8.5 - 9.5	max 0.1	max 0.1	89.84 - 91.5	max 0.03	max 0.1	max 0.05	max 0.08	other, each 0.05;

Comment: Al is a basis; the percentage of Al is given approximately.

Specification :

Mechanical properties :
s_в	- Tensile strength , [MPa]
s_T	- Yield stress, [MPa]
d₅	- Specific elongation at fracture , [ % ]
y	- Reduction of area , [ % ]
KCU	- Impact strength , [ kJ / m²]
HB	- Brinell hardness , [MPa]

Physical properties :
T	- Test temperature , [Grade]
E	- Young modulus , [MPa]
a	- Coefficient of linear expansion (range 20^o - T ) , [1/Grade]
l	- Termal (heat) condition coefficient , [Watt/(m·Grade)]
r	- Density , [kg/m³]
C	- Specific heat ( range 20^o - T ), [J/(kg·Grade)]
R	- Electrical resistance , [Ohm·m]

Sil2S ( Сил2С ) - Aluminium wrought alloys: chemical composition, mechanical and physical properties, hardness
Database of steels and alloys (Marochnik) contains information about chemical composition and properties more then 3000 steels and alloys

© 2003 - 2024 Database of Steel and Alloy (russian title is the Marochnik)
Administration of the Marochnik is not responsible for the content's use.