Database of Steel and Alloy (Marochnik) |
Home | Steel and Alloy | Search | Equivalent Grades | GOST Standards | Grading | Contacts |
Grade : | АL33 ( АЛ33 ) ( ВАЛ1 ) |
Classification : | Aluminium casting alloys |
Equivalent grades: | Is absent |
Fe | Si | Mn | Ni | Ce | Al | Cu | Zr | Mg | Impurity |
max 0.3 | max 0.3 | 0.6 - 1 | 0.8 - 1.2 | 0.15 - 0.3 | 90.6 - 92.9 | 5.5 - 6.2 | 0.05 - 0.2 | max 0.05 | all 0.5 |
Assortment | Dimension | Direct. | sв | sT | d5 | y | KCU | Heat treatment |
- | mm | - | MPa | MPa | % | % | kJ / m2 | - |
cast in a metal mould | 300 | 250 | 2.5 | Hardening and ageing | ||||
sand (mould) casting | 250-300 | 150 | 1-3 | 300 |
Brinell hardness for АL33 ( АЛ33 ) , sand (mould) casting | HB 10 -1 = 80 - 100 MPa |
Linear shrinkage : | 1.3 % |
T | E 10- 5 | a 10 6 | l | r | C | R 10 9 |
Grade | MPa | 1/Grade | Watt/(m·Grade) | kg/m3 | J/(kg·Grade) | Ohm·m |
20 | 0.7 | 2890 | 56.8 | |||
100 | 23.4 | 134 | 922 |
Mechanical properties : | |
sв | - Tensile strength , [MPa] |
sT | - Yield stress, [MPa] |
d5 | - Specific elongation at fracture , [ % ] |
y | - Reduction of area , [ % ] |
KCU | - Impact strength , [ kJ / m2] |
HB | - Brinell hardness , [MPa] |
Physical properties : | |
T | - Test temperature , [Grade] |
E | - Young modulus , [MPa] |
a | - Coefficient of linear expansion (range 20o - T ) , [1/Grade] |
l | - Termal (heat) condition coefficient , [Watt/(m·Grade)] |
r | - Density , [kg/m3] |
C | - Specific heat ( range 20o - T ), [J/(kg·Grade)] |
R | - Electrical resistance , [Ohm·m] |
© 2003 - 2024 Database of Steel and Alloy (russian title is the Marochnik)
Administration of the Marochnik is not responsible for the content's use. |