| Grade : | VSt5ps ( ВСт5пс ) |
| Classification : | Normal quality structural carbon steel |
| Equivalent grades: | Go here |
Chemical composition in % for grade VSt5ps ( ВСт5пс )
| C | Si | Mn | Ni | S | P | Cr | Cu | As |
| 0.28 - 0.37 | 0.05 - 0.17 | 0.5 - 0.8 | max 0.3 | max 0.05 | max 0.04 | max 0.3 | max 0.3 | max 0.08 |
Temperature of critical points for grade VSt5ps ( ВСт5пс ).
| Ac1 = 730 , Ac3(Acm) = 825 , Ar3(Arcm) = 815 , Ar1 = 690 |
Mechanical properties under Т=20oС for grade VSt5ps ( ВСт5пс )
| Assortment | Dimension | Direct. | sв | sT | d5 | y | KCU | Heat treatment |
| - | mm | - | MPa | MPa | % | % | kJ / m2 | - |
| 535 | 330 | 25 | 52 | 640 | ||||
| Steel hotrolled | to 20 | 490-630 | 285 | 20 | As-delivered state | |||
| Steel hotrolled | 20 - 40 | 490-630 | 275 | 19 | As-delivered state | |||
| Steel hotrolled | 40 - 100 | 490-630 | 265 | 17 | As-delivered state |
Technological properties for grade VSt5ps ( ВСт5пс )
| Weldability: | limited weldability. |
| Flakes : | not predisposed |
| Temper brittleness: | not predisposed |
Physical properties for grade VSt5ps ( ВСт5пс )
| T | E 10- 5 | a 10 6 | l | r | C | R 10 9 |
| Grade | MPa | 1/Grade | Watt/(m·Grade) | kg/m3 | J/(kg·Grade) | Ohm·m |
| 20 | 1.98 | 7850 | ||||
| 100 | 1.96 | |||||
| 200 | 1.86 | |||||
| 300 | 1.75 | |||||
| 400 | 1.67 | |||||
| T | E 10- 5 | a 10 6 | l | r | C | R 10 9 |
Equivalent steels for grade VSt5ps ( ВСт5пс )
| USA | Germany | Japan | England | European | Italy | Poland | Czechia | ||||||||||
| - | DIN,WNr | JIS | BS | EN | UNI | PN | CSN | ||||||||||
|
|
|
|
|
|
|
|
Types of delivery of grade VSt5ps ( ВСт5пс )
| B03 - Metal forming treatment. Forgings |
| В20 - Classification, nomenclature and general norms |
| В22 - Graded and shaped rolling |
| B23 - Sheets and Strips |
| В62 - Steel pipes and connecting parts to them |
Specification :
| Mechanical properties : | |
| sв | - Tensile strength , [MPa] |
| sT | - Yield stress, [MPa] |
| d5 | - Specific elongation at fracture , [ % ] |
| y | - Reduction of area , [ % ] |
| KCU | - Impact strength , [ kJ / m2] |
| HB | - Brinell hardness , [MPa] |
Physical properties : | |
| T | - Test temperature , [Grade] |
| E | - Young modulus , [MPa] |
| a | - Coefficient of linear expansion (range 20o - T ) , [1/Grade] |
| l | - Termal (heat) condition coefficient , [Watt/(m·Grade)] |
| r | - Density , [kg/m3] |
| C | - Specific heat ( range 20o - T ), [J/(kg·Grade)] |
| R | - Electrical resistance , [Ohm·m] |
Weldability : | |
| without limitations | - welding is done without heating and subsequent heat treeting |
| limited weldability | - welding is possible under heating up to 100-120 grade and subsequent heat treeting |
| hard weldability | - obtaining the quality welding needs the additional operations:heating up to 200-300 grade; the heat treeting ia annealing |
VSt5ps ( ВСт5пс ) - Normal quality structural carbon steel: chemical composition, mechanical and physical properties, hardness
Database of steels and alloys (Marochnik) contains information about chemical composition and properties more then 3000 steels and alloys
| © 2003 - 2024 Database of Steel and Alloy (russian title is the Marochnik)
Administration of the Marochnik is not responsible for the content's use. |